1. Overview
The belt demagnetizer is a coil-through demagnetizer. According to the principle of electromagnetic induction, the optimum design of magnetic circuit is carried out. More design ideas come from the actual requirements of the factory. The gradient magnetic field design has good demagnetization effect, reasonable selection of component parameters, high reliability and stability.
Belt demagnetizer is a coil-through demagnetizer that uses full-wave current waveform to demagnetize. Therefore, it has no interference to the power grid, low power consumption and strong anti-interference ability. It is widely used in demagnetization of magnetic products, workpieces and devices (such as bearings, gears, dies, automotive parts) after mechanical processing.
The demagnetizer cooperates with belt conveyor, which has higher efficiency, more convenient operation and adjustable conveying speed in a certain range, ensuring the safety of operation and demagnetization effect.
2. Characteristics:
The demagnetizer has reasonable magnetic circuit parameters, low power consumption, power saving function of demagnetizer tape, which increases the durability of the product, saves energy, and has good magnetic induction and demagnetization effect in demagnetization area.
Demagnetizer with leakage protector has higher operation safety.
There are small light indication, external alarm light indication and demagnetizer working status is obvious.
The belt conveyor device is made of wear-resistant belt and non-magnetic stainless steel, which can ensure the demagnetization effect and long-term use.
3. Technical Indicators
Scope of application: magnetic metal steel parts, bearings, workpieces, devices, dies, etc.
Demagnetization Voltage (V): ~380V
Demagnetization time (s): 5-30 (different length of workpiece, different time)
Demagnetization Current (A): <20A
Demagnetization region: 300mm * 400mm
Applicable width and height of workpiece: 250mm *350mm (after belt conveyor)
Degaussing workpiece: unlimited length
Residual magnetism: < 0.2mT (demagnetization magnetic field: > 35MT)
Working power supply: ~380V/50Hz (two-phase three-wire system)
|
Model |
Inner diameter |
|
(V) |
Demagnetizing |
|
B(mm) |
H£¨mm£© |
Fixed speed |
frequency control |
|
TCK-8/1000L |
300 |
100¡«150 |
4¡«8 |
|
¡«380V |
¡Ý300Gs |
|
TCK-10/1200L |
300 |
150¡«200 |
4¡«8 |
|
¡«380V |
¡Ý300Gs |
|
TCK-15/1500L |
350 |
200¡«250 |
4¡«8 |
|
¡«380V |
¡Ý300Gs |
|
TCK-18/1500L |
400 |
250¡«300 |
4¡«8 |
|
¡«380V |
¡Ý300Gs |
|
TCK-20/2000L |
500 |
300¡«400 |
4¡«8 |
|
¡«380V |
¡Ý300Gs |
|
TCK-25/2000L |
600 |
400¡«500 |
4¡«8 |
|
¡«380V |
¡Ý300Gs |
|
TCK-30/2500L |
700 |
500¡«600 |
4¡«8 |
|
¡«380V |
¡Ý300Gs |
|
More specifications can be customized. TEL: +86 0510-88233906 +86 18961518566 QQ£º582785275 | |
![êP(gu¨¡n)é]](images/clo.gif){kind=small}
